TBST120/60/60/2 Shielded Tent

TBST120/60/60/2 Shielded Tent
Neu auch zwei kleinere Zelte für die TEM Zellen TBTC0-TBTC2 erhältlich, eines mit AC und eines ohne AC Filter. (Preis auf Anfrage)
TBST86/49/45/1 Shielded Tent 86 cm x 49 cm x 45 cm
TBST86/49/45/2 Shielded Tent 86 cm x 49 cm x 45 cm (without main AC filter)
----------------------------------------------------------------------------------------------------
The TBST-120/60/60/2 is a shielded tent, designed to suppress interference from ambient noise during EMC pre-compliance measurements. With a size of 120 cm x 60 cm x 60 cm, it can accommodate any Tekbox pre-compliance test equipment such as LISNs or TEM-cells.
The shielded tent is composed of two layers of conductive fabrics. It is supported by rigid aluminium profiles. The filter panel at the side provides a 240V/10A AC filter, two 240V/10A DC filter and four coaxial feed through adapters with screw caps. The access opening is sealed with conductive Velcro tape.
Specifications
Outer dimensions: 120 cm x 60 cm x 60 cm
Opening dimensions: 85 cm x 35 cm
Frame: 20 mm x 20mm extruded aluminium profiles
Shielding: 2 layers of conductive fabrics
Seal: conductive Velcro tape
Suspension: Velcro stripes
Filter panel: 1 x 240V/10A AC filter; IEC socket
2 x 240V/10A DC filter; cables with female Banana couplers
3 x N- female feed through connector with screw caps
1 x BNC-female feed through connector
Attenuation: ~50…70 dB in the range DC to 6 GHz
Weight: 10.8 kg

 

2'975.00 CHF

Artikel-Nr: TBST120/60/60/2  

unser Unternehmen ist nicht mehrwertsteuerpflichtig

kurzfristig lieferbar  
 
Anzahl:   St



TBAS1 RF Attenuator Set The TBAS1 RF attenuator set consists of a 3dB, 6dB, 10dB and 20dB attenuator in a beech wood box 135.00 CHF

TBAS2 SMA Attenuator/Termination The TBAS2 RF SMA attenuator/termination set consists of a 3dB, 6dB, 10dB, 15dB, 20dB and 30dB SMA attenuators in a beech wood box 199.00 CHF

TBAS3 - 10W N RF Attenuator Set The TBAS3 RF attenuator set consists of a 3dB, 6dB, 10dB and 20dB attenuator in a beech wood box 199.00 CHF

TBST120/60/60/2 Shielded Tent The TBST-120/60/60/2 is a shielded tent, designed to suppress interference from ambient noise during EMC pre-compliance measurements. With a size of 120 cm x 60 cm x 60 cm, it can accommodate any Tekbox pre-compliance test equipment such as LISNs or TEM-cells 2'975.00 CHF

TBL0550-1 5uH 50A 5uH 50A Line Impedance Stabilisation Network LISN 785.00 CHF

TBHDR1 High Dynamic Range RF Pre-Amplifier The TBHDR1 is a high dynamic range amplifier with a frequency range from 30kHz to 1.5GHz. Its gain is characterized up to 6GHz. The TBHDR1 has a high IP3 and a low noise figure which makes it an ideal alternative pre-amplifier for spectrum analyzers and receivers in EMC test applications. Due to its low noise figure, high IP3 and gain down to the kHz range it also performs very well as amplifier for active loop antennas. 285.00 CHF

TBL5016-2 LISN 50uH CISPR 16 TBL5016-2 50uH Line Impedance Stabilisation Network LISN – CISPR 16 1'325.00 CHF

TBLC08- LISN 50uH TEKBOX EMV Zubehör - EMV Precompliance - LISN TBLC08 50uH Line Impedance Stabilisation Network LISN - CISPR 16 985.00 CHF

TBOH01 - LISN 5uH 5uH Line Impedance Stabilisation Network LISN - CISPR 25The TBOH01 5µH LISN is a device required to setup conducted noise measurements of DC-powered devices. It is designed to be used for EMC pre-testing in the frequency range of 150kHz to 110 MHz 375.00 CHF